Case History

sss
  1. Cone Bottom Tank Cone Bottom Tank
    February 18, 2014
    0
  2. Cake solids from both units on dual polymer program -Sludge at top left of photo treated only with anionic polymer Cake solids from both units on dual polymer program -Sludge at top left of photo treated only with anionic polymer
    February 9, 2014
    0
  3. Both units treated with anionic polymer and SPC-929 DS polymer Both units treated with anionic polymer and SPC-929 DS polymer
    February 6, 2014
    0
  4. Discharge water on left treated with anionic polymer and SPC-929 DS @ 0.5 lbs/dry ton dosage. Discharge water on right treated only with anionic polymer. Discharge water on left treated with anionic polymer and SPC-929 DS @ 0.5 lbs/dry ton dosage. Discharge water on right treated only with anionic polymer.
    February 5, 2014
    0
  5. Stacked material-reaching over 70% solids during daily run-due to pressure exerted by the height of the pile Stacked material-reaching over 70% solids during daily run-due to pressure exerted by the height of the pile
    February 4, 2014
    0
  6. Solids easily transported via conveyor to stack Solids easily transported via conveyor to stack
    February 4, 2014
    0
  7. Dewatering screen with 2ml panels. material dewatered from 35% to over 50% on screen Dewatering screen with 2ml panels. material dewatered from 35% to over 50% on screen
    February 4, 2014
    0
  8. Chunky material from cone bottom after treatment with SPC-929 dewatering polymer-note the granular nature of the -200 mesh solids Chunky material from cone bottom after treatment with SPC-929 dewatering polymer-note the granular nature of the -200 mesh solids
    February 4, 2014
    0
  9. Close up view of the mud formed by the revolutionary SPC-929 DS Close up view of the mud formed by the revolutionary SPC-929 DS
    February 4, 2014
    0
  10. Clean water off the top of the cone bottom tank, blended with the water sheeting off the slurry mud stack Clean water off the top of the cone bottom tank, blended with the water sheeting off the slurry mud stack
    February 4, 2014
    0
  11. Second view of the mud stacking from the tank Second view of the mud stacking from the tank
    February 4, 2014
    0
  12. Stacking 40% mud from cone bottom with both anionic polymer and SPC-929 DS cationic polymer-dual dosage of 0.5lbs/dry ton. Note water sheeting off the pile Stacking 40% mud from cone bottom with both anionic polymer and SPC-929 DS cationic polymer-dual dosage of 0.5lbs/dry ton. Note water sheeting off the pile
    February 4, 2014
    0
  13. 10,000 gallon cone bottom tank with portable mud slurry pump 10,000 gallon cone bottom tank with portable mud slurry pump
    February 4, 2014
    0
  14. Centrifuges – 330gpm @ 23% solids centrifuges (2) 660gpm’s Centrifuges – 330gpm @ 23% solids centrifuges (2) 660gpm’s
    February 4, 2014
    0
  15. 45% solids in holding area-dewatered to 55% before removal with loader after 2 hours setting time 45% solids in holding area-dewatered to 55% before removal with loader after 2 hours setting time
    February 4, 2014
    0
  16. Underflow from Cone bottom tank through slurry pump 0.6lbs polymer/dry ton-swelling clay Underflow from Cone bottom tank through slurry pump 0.6lbs polymer/dry ton-swelling clay
    February 4, 2014
    0
  17. Slurry Pump at bottom of tank with discharge to containment area Slurry Pump at bottom of tank with discharge to containment area
    February 4, 2014
    0
  18. Cone bottom tank with mud slurry going directly onto a dewatering screen. Water off the screen is returned to the front of the tank. 1250gpms @ 11% solids Cone bottom tank with mud slurry going directly onto a dewatering screen. Water off the screen is returned to the front of the tank. 1250gpms @ 11% solids
    February 4, 2014
    0
  19. Underflow solids from cyclone-50% solids and granular texture with SPC-929 Underflow solids from cyclone-50% solids and granular texture with SPC-929
    February 4, 2014
    0
  20. Overflow from cyclone with addition of SPC-929 into unit-99% removal rate! Overflow from cyclone with addition of SPC-929 into unit-99% removal rate!
    February 4, 2014
    0
  21. Overflow from Cyclone with no treatment Overflow from Cyclone with no treatment
    February 4, 2014
    0
  22. 18″ Hydrocyclone running 750gpm’s at 10% solids; -325 to colloidal SPC-929 injected at entrance to hydrocyclone 18″ Hydrocyclone running 750gpm’s at 10% solids; -325 to colloidal SPC-929 injected at entrance to hydrocyclone
    February 4, 2014
    0

Slogan

Text for button